Duoflam S17/3 32 Jet Chip Range & Fish Fryer Burner – LPG

Duoflam S17/3 32 Jet Chip Range & Fish Fryer Burner – LPG

Commercial 32-jet LPG replacement burner for traditional fish & chip ranges, chip fryers, deep-pan fryers and other compatible commercial catering equipment.

This is the Duoflam S17/3, also referenced as S17-3 or S17-3LPG. It is the larger 17-inch, 3-leg burner fitted with 32 individual LPG burner jets and a 3/4" BSP female bottom-entry gas connection.

If you are replacing an existing burner, we strongly recommend identifying it by the jet count, overall dimensions, inlet position and S17/3 reference rather than relying solely on the make of the complete fryer or chip range.

Burner Specification

• Manufacturer / Type: Duoflam
• Model: S17/3
• Alternative Reference: S17-3 / S17-3LPG
• Gas Type: LPG
• Number of Jets: 32
• Overall Size: Approx. 17" x 7½"
• Burner Configuration: 3-Leg Rectangular Multi-Jet Burner
• Gas Inlet: 3/4" BSP Female
• Inlet Position: Bottom Entry
• Heat Output: Approx. 112,000 BTU/hr
• BES Cross Reference: 9398
• Condition: Brand New

Common Applications

The S17/3 is commonly used as a replacement burner in commercial catering and frying equipment including:

• Fish & Chip Shop Frying Ranges
• Traditional Chip Ranges
• Commercial Fish Fryers
• Deep-Pan Gas Fryers
• Commercial Frying Ranges
• Commercial Hot-Plate Ranges
• Certain Chinese Commercial Cookers
• Other Catering Equipment Using an S17/3 32-Jet Burner

Many traditional commercial frying ranges were manufactured in different configurations, so the appliance make alone does not always determine which burner is fitted.

How to Identify the S17/3 Burner

Before ordering, compare your existing burner with the following:

• 32 individual burner jets
• Approx. 17" overall length
• Approx. 7½" overall width
• Three-leg rectangular burner design
• 3/4" BSP female bottom-entry gas connection
• LPG gas version
• S17/3, S17-3 or S17-3LPG reference where marked

If your existing burner matches these specifications, this is the common S17/3 32-jet chip range burner.

Not Sure If This Is the Correct Burner?

We specialise in LPG jets, burners and commercial gas replacement parts.

If you are unsure which burner you require, send us:

• A clear photograph of the existing burner
• Overall length and width
• Number of burner jets
• Gas type
• Gas inlet size and position
• A photograph of the appliance data plate where available

We can then help identify the closest replacement before you order.

Part Numbers & Cross References

• S17/3
• S17-3
• S17-3LPG
• BES 9398
• 32 Jet Chip Range Burner
• 32 Jet Fish Fryer Burner
• 17 Inch Chip Range Burner

What's Included?

• 1 x Duoflam S17/3 Burner Body
• 32 x LPG Burner Jets – Pre-Fitted

Please note: Regulators, gas hose, valves, pilot assemblies, pipework and other installation components are not included unless specifically stated.

Replacement LPG Jets Available

Individual replacement LPG jets for compatible Duoflam multi-jet burners are also available from LPG Jets.

If the burner body on your existing appliance remains serviceable and you only require replacement jets, contact us with the burner model and existing jet markings.

Important Gas Safety Information

This is a commercial gas component and must be correctly matched to the appliance, gas type, operating pressure and required heat input.

Installation, replacement, adjustment and commissioning of commercial gas equipment must be carried out by a suitably qualified Gas Safe registered engineer holding the appropriate commercial catering and LPG qualifications.

The complete appliance must be checked for correct gas pressure, heat input, combustion, flame condition, ventilation and safe operation before use.