Duoflam S17/3 32 Jet Chip Range & Fish Fryer Burner – Natural Gas

Duoflam S17/3 32 Jet Chip Range & Fish Fryer Burner – Natural Gas

32-jet Natural Gas replacement burner for commercial fish & chip ranges, traditional chip fryers, deep-pan fryers and other compatible commercial catering appliances.

The Duoflam S17/3 is also referenced as S17-3 and S17-3NG. It is a 17-inch, 3-leg multi-jet burner fitted with 32 Natural Gas jets and a 3/4" BSP female bottom-entry gas connection.

These burners are normally identified by the burner dimensions, jet count, inlet position, gas type and S17/3 reference. This makes it important to compare the replacement burner directly with the existing unit before ordering.

Technical Specification

• Manufacturer / Type: Duoflam
• Model: S17/3
• Part Reference: S17-3NG
• Gas Type: Natural Gas
• Number of Jets: 32
• Jet Reference: N64 Natural Gas Jets
• Overall Size: Approx. 17" x 7½"
• Configuration: 3-Leg Rectangular Multi-Jet Burner
• Gas Connection: 3/4" BSP Female
• Connection Position: Bottom Entry
• Approx. Heat Output: 147,000 BTU/hr
• BES Cross Reference: 9397
• Condition: Brand New

Common Uses

• Fish & Chip Shop Frying Ranges
• Traditional Chip Ranges
• Commercial Fish Fryers
• Deep-Pan Fryers
• Commercial Frying Ranges
• Commercial Hot-Plate Ranges
• Certain Chinese Commercial Cookers
• Compatible Commercial Catering Equipment Using an S17/3 Burner

Many traditional chip ranges were manufactured to different specifications, meaning the make of the complete appliance does not always identify the burner fitted underneath the pan.

How to Identify an S17/3 Burner

Check your existing burner for the following:

• 32 burner jets
• Approx. 17" length
• Approx. 7½" width
• Three-leg rectangular configuration
• 3/4" BSP female bottom-entry gas inlet
• Natural Gas
• S17/3, S17-3 or S17-3NG reference where visible

If these details match your existing burner, this is the common S17/3 32-jet Natural Gas chip-range burner.

Need Help Identifying Your Burner?

LPG Jets specialises in replacement gas jets, burners and commercial gas components.

If you are unsure which burner is fitted to your appliance, send us:

• A clear photograph of the burner
• Overall length and width
• Jet count
• Gas type
• Gas inlet size and position
• Appliance data plate details where available

We can use this information to help identify the closest replacement.

Part Numbers & Cross References

• S17/3
• S17-3
• S17-3NG
• BES 9397
• N64 Jets
• 32 Jet Chip Range Burner
• 32 Jet Fish Fryer Burner

What's Included?

• 1 x Duoflam S17/3 Burner Body
• 32 x Natural Gas Burner Jets – Pre-Fitted

Please note: Pilot assemblies, valves, pipework, regulators and other installation components are not included unless specifically stated.

Replacement Natural Gas Jets

Replacement Natural Gas jets for compatible Duoflam multi-jet burners are also available from LPG Jets.

If the burner body remains serviceable and you only need replacement jets, contact us with the existing burner reference and jet marking.

Gas Safety

This is a commercial gas component and must be correctly matched to the appliance, gas type, operating pressure and required heat input.

Installation, replacement, adjustment and commissioning must be carried out by a suitably qualified Gas Safe registered engineer with the appropriate commercial catering qualifications.

The complete appliance must be checked for correct gas pressure, heat input, combustion, flame condition, ventilation and safe operation before use.