Manual Changeover Valve

This valve is most commonly used to replace an existing valve on a manual changeover unit now faulty (Cavagna, Reca etc), the 2 top threads are for the W20 pigtails to thread on, the other pigtail end can be either POL or Butane Nut, these pigtails have the non return valve fitted,  the base thread is 1/4" male, so it is suitable for 1/4" female on a regulator

Rear bracket for mounting is exactly the same used for Cavagna, Reca manual changeover kits so there is no issue with alignment

2 x 6mm holes, 22mm centres

The handle is turned to the left or right to select the inlet required. When located in the centre, the valve is at an off position i.e the outlet connection is isolated on both sides